鼓勵此網誌:0
如同蘋果iPhone手機滑動式的多功能PPC手機螢幕保護程式 (繁體中文化by: Terry)
Mr. A_C 剛釋出了本 S2U2 v1.32、S2U2 v1.31 與 S2U2 v1.30 軟體,此些版軟體增加了支持Manila 2D 及3D 氣象顯示,並對S2P的支持功能更進一步的增進,其詳細變更與修正內容如下:
Changes of v1.32 (1.32 版修改內容)
- fixed the issue of Manila 3D Weather.
(修正 Manila 3D 氣象預報功能問題)
- fixed a few weather display problem.
(修正一些氣象顯示問題)
- when CallerID is set to full-screen, unknown.png will be displayed as its own size.
(當來電者辨識設定到全屏顯示時, unknows.png 圖片無法全屏顯示)
- a few minor bugs fixed.
(修正一些其他問題)
Changes of v1.31 (1.31 版修改內容)
- fixed the issue of Manila 3D Weather.
(修正 Manila 3D 氣象預報功能問題)
- fixed a few weather display problem.
(修正一些氣象顯示問題)
- a few minor bugs fixed.
(修正一次其他問題)
Changes of v1.30 (1.30 版修改內容)
- added a new display mode - GDI (removed DirectDraw registry key). If your device has problem (e.g. no display) with RawBuffer or DirectDraw, try this. But on some old devices or VGA devices, it may be very slow.
(新增一新顯示模式-GDI (移動的DirectDraw註冊鍵),假如你的設備使用RawBuffer或DirectDrew功能時產生問題(例如: 沒有顯示),請嘗試使用本功能。但是對於某些老舊設備或VGA設備,本功能動作可能非常慢速)
- added optional "Slide to End".
(增加 "滑動終止" 選擇內容)
- added weather support to Manila 2D & 3D.
(增加支持Manila 2D 與 3D的氣象預報顯示)
- added option to delay "Blank screen on Talk".
(增加延遲 "電話中空白螢幕" 選擇內容)
- added option to unlock when external power is connected.
(增加當使用外接電源時開鎖的選擇內容)
- added option to automatically run S2P when the headphone (either Bluetooth or wired) is connected.
(增加當使用耳機(或是藍牙/有線設備)時自動執行S2P程式的選擇內容)
- added option to unlock when the stylus is pulled out.
(增加當觸控筆拉出時開鎖的選擇內容)
- added option to lock when the stylus is put back.
(增加當觸控筆放回時鎖定手機的選擇內容)
- added option to disable the bottom curtain.
(增加去除保護螢幕畫面底部簾幕的選擇內容)
- it now locks the Diamond's Home button (but in another way).
(增加鎖定HTC Diamond手機Home按鈕(使用不同方式)功能)
- all graphics support high resolution, i.e. truely VGA. (thanks poorlyduck for helping the artworks)
(支持高解析度圖片, 例如: 真實VGA圖片)
- changed some graphics elements (e.g. a new battery connector).
(變更一些應用圖片元素(例如: 一新電池連接器)
- fixed the bug that occasional double lock occurred in v1.22.
(修正1.22版本的問題內容 - 偶而雙重鎖定)
- moved the S2UText & S2AText settings from registry to lang.ini (as it's more related to language).
(變更S2UT及S2AText設定圖徑 - 原由註冊表內容修改,變更至由文件化內容修改)
- reduced the memory usage.
(降低程式對手機記憶體的使用率)
- a more logical S2U2 Settings.
(更多邏輯化的S2U2設計內容)
- some minor bugs fixed.
(修正一些次要的問題內容)
-軟體下載 Download: (在軟體下載頁面,點選Free User按鈕下載)
1. S2U2-1.30-QVGA.rar S2U2-1.30-VGA.rar
2. S2U2-1.31-QVGA.rar S2U2-1.31-VGA.rar
3. S2U2-1.32-QVGA.rar S2U2-1.32-VGA.rar
-軟體安裝使用方法:
1. 請先將舊版本的 S2U2 程式移除;
2. 將下載軟體文件先在電腦解壓縮處理, 在將文件複製到手機記憶卡內;
3. 打開文件夾, 點擊 S2U2-1.30 / S2U2-1.31 / S2U2-1.32 軟體文件進行安裝(安裝手機主記憶體位置);
4. 以上動作完成了 S2U2-1.30 / S2U2-1.31 / S2U2-1.32 英文版本安裝。;
-繁體中文化處理:
1. 將下載的軟體文件夾內的 S2U2-1.30 lang.lni 文件(在手機上顯示為 S2U2-1.30 lang)拷貝到手機之檔案總管\我的裝置\Program Files\S2U2 資料夾內;
2. 將手機 檔案總管\我的裝置\Program Files\S2U2 資料夾內的 lang 文件刪除;
3. 將手機 檔案總管\我的裝置\Program Files\S2U2 資料夾內的 S2U2-1.30 lang 文件名稱更改為 lang (在手機上顯示者);
4. 將手機重新開機。







